Materials: Billy bookcase, Kvissle organizer

Description: I redecorated my bathroom with all new Ikea products but the one that was hacked was the Billy bookcase. I wanted something that spaced the sink from the wall just enough and would also align with the sink/cabinet. The only thing I found was the bookcase. I also wanted it to float with the sink cabinet but align with the window frame.



1. I plugged in my table saw to cut about 3 inches off the bottom of the side panels of the bookcase so the bottom would align with the cabinet.
2. Cuts were made before assembling the bookcase. I only had to cut the side panels as the back isn't as long.
3. I cut a 2x4 to a shorter width than the cabinet/bookcase so it wouldn't show from the side and bolted that to studs in the wall. Both pieces rest on that.
4. I had to modify the wall mounting portion of the cabinet so that would bolt to studs in the wall but the bookcase is only attached by one screw with angle metal on the bottom going into the 2x4 support and one screw with angle metal in the top corner that goes into a stud. Since the 2x4 supports the weight it doesn't take much to keep it there.



~ Chumly

0 comments:

Post a Comment

 
Top